WarningCommercial Sales AreaWelcome to HappyStim-USAAbout UsVISIT OUR ON-LINE STOREElectro-Layaway PlanCancellation, Refund and Return PolicyPaying By Credit CardPrivacy and other FAQsShipping & Useful InformationTestimonialsLinksReferralsQuestions? Contact UsDisclaimers
    Back 

Out of Stock - Joanne's Bipolar Nipple Clamp Electrodes
In order to experiment with bipolar nipple play, I have designed a set of bipolar nipple clamps.
 
Supplied as a pair of nipple clamps.  webassets/2X2a.jpg
 
Each pair of Bipolar Nipple Clamps is printed in YELLOW PLA. These clamps come with 6mm conductive rubber tubing that takes 2mm plugs fitted into the clamping jaws.
 
  webassets/2X2d.jpg  webassets/2X2f.jpg 
 
One side of each set of Conductive Rubber has blanking pins fitted to secure them in place and to prevent any chance of the two clamps shorting against each other. Your TENS cables plug secures to the other end.
 
To use both sets of clamps, you will need an e-stim control box with two isolated channels to prevent any risk of the current going across the chest instead of just through each nipple.
 
These clamps are perfect for larger nipples or for clamping down on the areola behind more petite nipples.
 
  webassets/2X2c.jpg 
 
The large knurled thumbscrews are fitted to nylon nuts and bolts (colour may vary from that shown) that are used to tighten and hold the clamping jaws together. I used nylon fittings to further isolate the two pieces of conductive rubber to prevent the current from using metal bolts as a shortcut.
 
  webassets/2X2b.jpg
 
Safety: Never put a current through the chest area. Always use a control box with isolated channels and use one channel on each nipple.
 
Instructions
 
1. Open the jaws of the clamp. Use electrolube to ensure you get good contact between the conductive rubber and your skin.
 
2. Attach the plugs to one end of the conductive rubber. Use one channel per nipple.
 
3. Pull the nipple through the clamp and squeeze the jaws shut. Tighten the retaining nuts to the required level of clamping forces.
 
4. Plug your cable into your control box and ensure all power levels knobs are set to zero output.
 
5. Turn on your power box, select your favourite settings and slowly turn up the
 
6. power.
 
Tips For Use
 
• Always use conductive lube with conductive rubber. Never use silicone lube or oil-based products as they are an insulator.
 
• Silicone lube bonds to conductive rubber and creates an insulating coating, rendering it unusable, so never use silicone lube.
 
• Water-based lubes will suffice if you have no electrogel.
 
• Only use a control box with isolated channels and use one channel per nipple

Item #2x2JoanneNipple


Regular price $33.95 

Concerned with placing your order online?  Call or Fax in your order.  Simply call 618-343-4344. If you wish to fax your order to us, please send all pertinent details including your credit card information and a copy of your order.  Thank you.
  Back