15% Off - Classic 5 Probe
This combination hard plastic and stainless steel insertable electrode is another that is sure to please.
It has two stainless steel contoured plates embedded into a durable hard plastic tapered design for easy insertion and
comfortable use. Each stainless plate is connected at the bottom with a TENS pin socket. Standard for this insert. The
Classic 5 Probe measures 3" from the tip to the base and is right at 1-1/4" at the widest part at the top and
tapers to 5/8" at the bottom next to the "stopper" at the base. The base "stopper" measures
3/4" wide by 1" in width. It is not round at the base.
Click on the
picture at the right for a larger view.
The Classic 5 is 1-1/8" in diameter at the
widest point and tapers to 5/8" at the bottom of the base. It is 3" long and the flat plastic stop at the
base is 1" wide and 3/4" wide.
If you are using a power unit that has Banana or Snap connectors, be sure
that you have the proper TENS to Banana or Snap adaptors.
Adaptors can be purchased in our Wiring and Adaptors store tab or simply click on the picture to be directed to that
Note: If using this insert as a single pole electrode you will need to use a Y-Joiner
to connect both of the TENS sockets to a single connection that connects to one power lead wire. You can purchase these
Y-Joiners in the Wiring and Adaptor section of our estore or go directly to them by clicking on the picture above.
Item #Classic 5