WarningCommercial Sales AreaWelcome to HappyStim-USAAbout UsNew Items & SpecialsVISIT OUR ON-LINE STOREElectro-Layaway PlanFax Instructions - Paying By Credit CardPrivacy and other FAQsShipping & Useful InformationTestimonialsLinksReferralsQuestions? Contact UsDisclaimers
    Back 

Conductive Paint for Surface Conductivity - 1 Oz.
Have a project that you want electrified?  A simple solution is to simply paint the area you wish to make conductive and your good to go.  This is the fastest and easiest way to get a conductive surface on just about any material you want to make conductive.  Brush on two or more coats of this waterbase dark gray conductive paint for best results (let dry between coats). It cleans up with water while still wet, and dries overnight.  It is recommended that surfaces be allowed to dry 24 hours between coats for best results.

webassets/CondPaint-1.JPG 1 Ounce Jar - and does go a long way

While we cannot guarantee it will work on every type of material or project you have in mind, on the drawing board or have in process, this paint will work in most cases.  It dries to a very hard thin gray color and once completely cured, makes a surface conductive.

It can be thinned or brought back to life if it dries out a little by simply adding a small amount of water.

Note: The following precautions are to be adhered to while using and applying the product.  After curing, it dries to a very hard finish, there are no fumes and the product cures to a very hard, thin, gray coating posing no liquid or fume threat. 

Safety Precautions from the Manufacturer:

Harmful or fatal if swallowed. Causes moderate eye irritation. Repeated or prolonged contact can cause irritation or dermatitis.  May be harmful is absorbed through the skin.  Vapors, mists and dust from this product are harmful if inhaled. Wear protective goggles and rubber gloves when using the product.  Use in a well-ventilated area.  Avoid prolonged inhalation and contact with eyes, skin and clothing.  Keep the container tightly shut after use and keep from freezing.

Product Specifications:

Contains Carbon Black, classified by IARC as a 2B Carcinogen, possibly carcinogenic to humans, based on "sufficient evidence in animals" and "inadequate evidence in humans".

Ingredients:

Water, Carbon Black, Graphite, 2-Butoxyehonal, Acrylic Acid, Polymer VOC=110 G/L.






Regular price $9.95 

Concerned with placing your order online?  Call or Fax in your order.  Simply call 618-343-4344. If you wish to fax your order to us, please send all pertinent details including your credit card information and a copy of your order.  Thank you.
  Back