Finally after a few years now, we have our Circular Clips back in stock!!  They are now stronger and with a new upper design feature.  By simply securing the conductive tubing and tightening the thumbscrew, you can get a quick and secure connection.  After that, just place your lead into the top connection and you are good to go.

A special thanks to Joanne (sexmachinereviews) and her staff for making this happen with 3D printers!!  The previous clips were made with an injection mold that was only available from a company in Australia with a minimum order of many hundred at a time.  With 3D printing, we can now order a lot less and get them in stock much quicker.

The same principal is used with the new clips, with the exception of a stainless steel threaded nut now used instead of the old plastic threads.  Much sturdier. design.  🙂

The aluminum thumbscrews are still made by a different company with a CNC type machine.  These are made with two types of connections; Banana socket and a male Snap connection.  In order to adapt to a TENS pin connection, a small piece of our 4x2mm conductive tubing is pushed into the banana socket to accommodate a TENS pin securely. A piece of electrical shrink wrap is heated and secured on the outside threads to insulate the aluminum thumbscrew. Be sure to use the Drop-Down section to indicate which connection you want.

These clips are designed to be use with our 4mm tubing, 4mm Solid tubing and our 6mm conductive silicone tubing that can be purchased separately to make your own flat loops.  These clips will last a very long time is used carefully.

NOTE: The two loops shown above are for illustration purposes only.  You can purchase the 4mm solid, 4x2mm and 6x2mm conductive silicone tubing in our Conductive Silicone & Electrodes Section of the web site.