This combination conductive tubing package is very affordable and versatile as well.  Make your own conductive rubber loop electrodes with plenty to go around “everything”.

This package contains:

• 2 small spring loaded cord locks

• 2 spring loaded double hole 6mm cord locks

• 24 inches of either solid 4mm cord or 24 inches of 4x2mm tubing

• 2 feet of our popular 6x2mm conductive tubing.

The spring loaded cord locks make it easy and simple to make a loop and secure it to the skin for a perfect fit every time.  Just squeeze the spring clips down, thread the tubing into them and release for a secure lock. You just need to be careful and not pinch the skin when you get the lock almost in the snug position.  OUCH 

The inner hole of our 4x2mm and 6x2mm tubing is perfect to insert a TENS pin or TENS pin adapter into for quick secure connections.  Need extra cord locks?  The small cord locks can be found here and the larger 2-hole can be found here or go to the Wiring and Adapters section of the site.

With 4 feet of conductive tubing, the combinations you can make are many.  Great for having extra around when you have a friend over or even as a sample gift.

HELPFUL HINT: Before cutting, make the loop to determine if it is the correct size and that you have enough left on the ends for the cord lock and to connect the TENS pin into.

The 4x2mm and 6x2mm tube is connected by using a TENS pin or TENS pin adapter, a simple way to connect to the tubing.  Just plug it into the end.  Solid Cord can be connected with an alligator clip.  See below for illustrations.

    

Examples of connecting a TENS pin or alligator clip to the 4x2mm and 4mm solid cord.

If you need any water based lube, which some folks do, be sure to visit our lubes and gels section.