Finally, a company has made a “hot tip” insert.  🙂  Although it is a bi-polar, there are two electrical points; one at the stainless steel tip and the other all contact points on the metal that surrounds the back of the head.  The tubing from the top of the insert to the stainless tip in non-conductive.  Note that the ring that goes over the back of the glans is 1.25″ in diameter on all three sizes.  These inserts are “hard wired” with a male 2.5mm audio jack, so they will fit perfectly into the Coyote, Rimba and other power boxes that accept a 2.5mm audio jack lead wire.  For those of you who have a 3.5mm power box connection, a 3.5mm to 2.5mm audio adapter is available in our wiring and adapter section of the web site.

Note:  Although these are hot tipped electrodes and the shaft is non-conductive tubing, it may not feel like the tip is truly hot.  This is due to current running from the tip to the electrode around the head.  If you want to make it true hot tip and your are a DIY person, you would have to cut the 2.5mm audio jack off and place banana or TENS sockets on each of the wires.  Then connect the wire with the hot tip to one of your lead wires and the other to say a single-pole electrode like a prostate stimulator, TENS pad or a conductive loop.   We sell the banana and TENS sockets on a plain wire in our Wiring and Adapters section.

   Two lengths to choose from; 4″, 6″ and 10″, so pick your pleasure depth. 🙂 Be sure to indicate the length you want in the Drop-Down box on the product page. 

    Although the illustration shows a current image coming up from the tip, only the tip is “hot”.