E-stim is often considered to bring new delights to play in the bedroom, and we wanted to make something more magical, a magical Bipolar ElectroWand.

Cable key
	A 4mm (Banana Pin) cable is needed.
	A 4mm/Low profile cable can be used. For Sitting while using

Do you Believe in the magic?

Our original ElectroWands have been popular ever since we first created them, but we felt there was always something missing – as a monopole design, they have to be used with another electrode, but if a certain famous wizard had unicorn hair in his wand, we knew we needed something more, and after years of toiling in the dark dungeon of delights a creation appears the new bipolar wand. No dragons were harmed.

Control

Created with an elegantly contoured neck, the Bipolar ElectroWand slides in smoothly, while a tactile ridge signals the transition from handle to neck to prevent accidental surprises.

The handle is designed for precise control, even in the most intense moments, allowing for deep and controlled exploration of your partner’s (or your) most sensitive spots. The bipolar head delivers sensation where you desire, putting the power fully in your hands, and the length is ideal for solo vaginal play.

The design also allows more creative uses, dab some gel on the skin and try it as as a skin play electrode, the only limit is your imagination

Made to last a lifetime, it’s easy to disassemble, clean, and maintain.

Lifetime Guarantee

The Bipolar ElectroWand like all of our premium electrodes is covered by our exclusive lifetime guarantee.

Cleaning

The Bipolar ElectroWand can also be taken apart for cleaning. Please do not use caustic cleaning substances for cleaning as this may discolor the electrode.

Supplied in a protective storage tube.

Specifications

Name	Small Bipolar ElectroWand
Type	Bipolar Insertable
Overall Length	238mm (9.4″)
Insertable Length	133mm (5.2″)
Head Diameter	37.5mm (1.5″)
Weight	571g (1.25 pounds)
Connections	2 x 4mm sockets in the handle
Guarantee	Lifetime

E-Stim Systems BiPolar ElectroWand Manual

TO USE

Before you connect any cable to the power box, connect the cable to the electrode,  there are 2 4mm sockets in the base of the handle, coat the electrode with conductive gel and then gently insert. The electrode is generally designed to be inserted up to the end of the ‘neck/handle join, but there are not issues if you with to insert further. The current will then flow between the head and base, stimulating the areas in-between.

Once the Bipolar ElectroWand is inserted, ensure the power box is switched off and the output level control is at minimum, then insert the 3.5mm jack plug into the correct socket on the power box.

NOTE: E-STIM ELECTRODES CANNOT BE USED WITH A CONDOM.

Switch the control box on and slowly increase the output level to provide the desired level of stimulation. For a slightly different effect you can swap the 4mm plugs over.

If you remove the ElectroWand while it is still powered the intensity of sensation may increase.

The ElectroWand can also be used on the surface of the skin, simply use a small about of conductive gel on the skin to

SAFETY WARNING

DO NOT CONNECT ANY ELECTRICAL DEVICE TO ANY LOCATION ABOVE THE WAIST (ACROSS THE ARMS COUNTS AS ABOVE THE WAIST!), BUT ESPECIALLY DO NOT CONNECT ACROSS THE HEART, CHEST, NECK OR HEAD. DO NOT USE IF YOUR SUBJECT IS FITTED WITH A PACEMAKER OR ARE PREGNANT.

Remember you use any e-stim device at your own risk. You must read and understand the user manual and all other instructions before attempting operation.

CLEANING

Always clean your electrode both before and after use and make sure the electrode is completely dry before storage.

Soap, hot water and medical grade cleaning wipes can be used to clean your electrode. Do NOT use caustic cleaning substances as this may damage the electrode.