Right angle banana plugs make connection installations easy and wonderful for DIY projects. They are designed for use with electrodes where a traditional banana plug will not fit or work, but a right angle will. The right angle nature of these banana plugs minimizes the risk of ruining regular straight pins if you want to sit on a plug while e-stimming.  Note: These work very well with the E-Stim Systems bi-polar plugs, as they fit perfectly side-by-side without touching like our rounded 90 degree banana adapter cable tend to do.

Notice in the two pictures below that with both set-screws removed, the banana pin will push into the connection all the way, versus removing only one set-screw.  The rubber insulated boot fits best when both set-screws are completely removed.

 

 

  

These high quality plugs are the closed screw type and can accept bare or solid wire from 12 to 18 AWG. Each pair comes with one plug color coded red and the other coded black, for easy polarity identification.

The plug body is made of copper fitted with a ferro-manganese tip. The entire plug is then plated with 24K gold to help prevent corrosion.

The width of each housing is 5/16″ and the block height to the banana pin is also 5/16″.  This enables adequate space between the 4mm connection sockets located at the bottom of many bi-polar prostate plugs.

Features:

• Can accept bare wire and spades
• Color coded black/red rings for maintaining proper polarity
• Secure, positive contact with binding posts
• Corrosion resistant, 24K gold plated finish
• Copper body construction and ferro-manganese tips
• Each connection shaft has 2 set screws in the housing for very secure connections