If you are looking for a Heavy Duty Bi-Polar Plug with a couple of ridges to make it interesting, this plug is for you.  This electrode is smooth, highly polished, and has a nice smaller neck at the base to keep it in place.

Made of Nickle free high-grade aluminum with a super-slick polished finish, it is easy to use and a breeze to clean up.

NOTE: This is a “hard wired” bi-polar electrode and has a 2.5mm jack at the end for plugging into a power unit.  A 2.5mm jack will work directly with a Rimba, Zeus, Pipedream Shock Therapy Unit or others using a 2.5mm input jack.  If you want to use this with a unit having a 3.5mm input jack, you will need to use a 2.5mm female to 3.5mm male adapter.  You can find these in our Wiring and Adapter section in our store.  

Specifications:

Weight: Approximately 8 oz. 210 gr.

Overall length is 4″

Insertable depth is 3-1/2″and has two “bumps”, each 1-3/8″ (35mm) in diameter.

Top smaller electrode is 1-1/4″ in length and the ridge is 1″ at the lowest point.

Bottom larger electrode is also 1-1/4 in diameter but 1-3/8″ in length.

The bottom neck is 3/4 in diameter and 3/4″ long.

The base is 1-3/4″ in diameter and 3/8″ thick.

Two 3/16″ diameter holes have been placed on each side of the base to that it could be fastened to a flat surface or secured inside or on a belt.  There is also a channel grooved into the bottom of the base for the electrical wire to lay into for out of the way flat surface fastening.