Here is a useful adapter for those of you who have a PES power box or if you use PES low profile leads. These may even be very useful if you have an ordinary female snap style connection on the leads of a non-PES power box. These adapters have been made with a covered TENS pin (for safety purposes) with the sides of the snap portion cut back enough to connect a PES lead wire to the male snap head (see below). If you want to expose the TENS pin, all you have to do is simply take a razor knife and cut away the soft rubber housing as shown below and you have a perfect adapter to plug into any TENS socket.
Cut away version TENS pin exposed
NOTE: The price is for ONE adapter. You can buy two for $8.95 if you want a pair and save $1.00. Be sure to designate it in the Drop-Down Box below.
A separate 6″ wire is available to plug into the covered “as purchased” version that will give you a longer wire if you need it. Shown below are a couple of applications using PES leads.
To attach these to the low-profile snap simply squeeze the PES ring on the outside edges and place them down onto the male snap head of the adapter. To disconnect the snap lead, just squeeze the lower portion of the PES lead to open the ring. Do not try to just pull the adapter from the PES snap lead wire. You may damage or break the small plastic housing on the PES lead.
Shown using our 6″ TENS pin wire with a TENS socket on connection end. Wires can be purchased separately.
Reviews
There are no reviews yet.