We had our manufacturer make these special 90 degree adapter cables after we had so many customers asking for them.  These right-angle adapter wires make it easy to connect any TENS or Banana socket electrode or plug, allowing for sitting while stimming.  Previously, the only choice you had was the straight TENS or Banana pins and trying to sit on a plug would be very difficult and most likely ruin and bend your TENS or Banana pin attached to your lead wires.  These adapter wires are heavy duty and make sitting on an electrode easy.  The 90 degree pins have been well soldered into the rounded connector and then a heavy duty black hard epoxy has been poured into the cavity for added strength, making these a perfect connection to electrodes whether you want to sit or just want to connect them at a 90 degree angle.  You won’t go wrong with these adapters.  The product picture shows the TENS pin, but we also have the 90 degree banana pin.  Both TENS and Banana Sockets are available too.  Use the drop down menu to indicate what connections you want.

We have had a few customers point out that some of the newer silicone and E-Stim Systems plugs have the connection holes a bit closer together than the previous ones were.  This will make the two 90 degree connectors bind when putting them together at the base of the electrode and make them almost unusable.  If there is only a slight bind, you can carefully shave or grind the edges on one side of each 90 degree round adapter, being careful not to get to the metal inside the edge.  If both are exposed to the metal, you will short circuit them.