We found these interesting stainless steel devices and thought they would have a good use for some of our customers looking for something a little different. The single 1/2 ring on the shaft slides up and down and stays in place once it surrounds the shaft.  The small loop that comes over the head of the penis has a small 3/16th inch diameter ball that can be inserted into the urethral canal.  The length of the curved shaft to the start of the spring is 2.5 inches.  The insertable depth of the ball on the end of the loop is 3/4 inch.  The spring length is 1-3/4 inch.  Three diameters to choose from; Small 1-1/8″, Medium 1-1/4″ and Large 1-3/8″  The overall length of the device is 4.25 inches.

Be sure to choose the diameter you want in the Drop-Down box below.

To electrify it, an alligator clip can be clipped on the head loop or anywhere you may wish to clip it for electrification.  The alligator clip we sell in our wiring and adapter section has a banana sized hole in the end, but if you want to use it with a TENS pin, a piece of 4x2mm conductive silicone tube can be inserted inside the end to use with a TENS pin.

NOTE: the Large version we have now has a TENS pin wire attached to it.  The Small does not.