This is a bipolar electrode and it features 6mm conductive rubber arranged as a cock loop as well as a top arc of 4mm conductive rubber with three stainless balls to focus the sensations. Both conductive rubber loops take 2mm TENS style pins.

Designed for intense penis play, the 6mm loop can be used as a common electrode in a tri-phase configuration leaving the 4mm loop to be paired with another electrode or just use it on one channel, the choice is yours.

Usually, cock loops are monopole electrodes but this one is different. It is a bipolar design and it should be fitted snugly under the glans of the penis with the top loop going right over your glans. Place the balls where you want the most sensations and some guys place one on their meatus (pee hole).

The inner holes are sized for 6mm and 4mm CR tube size and it will be supplied with the 6mm CR fitted in place with the 4mm loop ready for assembly. If they are shipped fully assembled then there is a chance of the 4mm CR being damaged in transit.

Instructions

Assembly: This electrode will arrive with the 4mm conductive rubber loop not fully inserted through the 3D printed pieces, this is to ensure it gets to you safely through the postal system. You will need to feed the 4mm conductive rubber through the small holes. Some water-based lube can help with the insertion of the conductive rubber, you can even use a pencil sharpener to gently put a chamfer on the end of the tubing. Once fitted the small pin can be inserted into one end to prevent it being pulled back through when you tighten this loop.

·         Place the glans loop over your glans and tighten the 6mm conductive rubber so that it fits snugly just under your glans. Use electrolube to ensure you get good contact between the conductive rubber and your skin.

·         Attach a plug to one end of the 6mm conductive rubber.

·         For the 4mm conductive rubber pull it so that it and the stainless steel balls rest snugly against your glans.

·         Attach the second plug to the 4mm conductive rubber.

·         Plug your cable into your control box and ensure all power levels knobs are set to zero output.

·         Turn on your power box, select your favourite settings and slowly turn up the power.

Tips For Use

• Always use conductive lube with conductive rubber. Never use silicone lube

or oil-based products as they are an insulator.

• Silicone lube bonds to conductive rubber and creates an insulating coating,

rendering it unusable, so never use silicone lube.

• Water-based lubes will suffice if you have no electrogel.

• Cock loops should be a snug fit to allow for swelling of your penis without

cutting off the blood supply.