If you are a Do-It-Yourself person or just looking to experiment and make your own prototype items, ShapeLock™ is a perfect solution to meet your needs.  ShapeLock is stronger than most regular plastics, safe and non-toxic and has no harmful chemicals or catalysts.

For an estimmer, ShapeLock is only limited by your imagination.  Make plugs (anal or vaginal), clit electrode holders, other special holders for conductive tubing, sheeting or flat strap or even make an electrified head, shaft or ball electrode.  Using our conductive paint on the finished product with an electrical connection molded into it may prove to produce some very interesting results.  You can even embed items into this plastic as you are molding and it will stay put.  The great part about this product is that if you make a mistake, simply re-heat it and fine tune your project or simply start over.  Can be re-melted and used for another project if you don't like the results of the one you were working on.

Sold by the ounce. As a general guide for the amount of material you might need, one ounce of un-melted ShapeLock™ pellets is equal to approximately 1.5 cubic inches. 
 
So, if you order 6 in the "add to cart" button, you will be getting 6 ounces of plastic ShapeLock™ pellets. 

Complete instructions on the use of this product will accompany your purchase.
Main Characteristics:

1. Turns clear and becomes soft and moldable in hot water (150 degrees)
2. Stays moldable down to 130 degrees
3. Sets up super strong and turns opaque white at room temperature

Other Qualities worth noting:

1. Lightweight, very tough and relatively inexpensive (can be used over and over)
2. Can be drilled, sawed, machined, painted and even colored with dye
3. Make molds, sculptures, brackets, housings and a lot more