1-7/16" Diameter Thin Wall Conductive Tubing

Back

1-7/16" Diameter Thin Wall Conductive Tubing

NOTE: This is the same tubing that is shown on the V2000 liner page.

We found that a lot of folks do not need a whole foot of this liner for their projects. So, we now offer it in 6" pieces. If you just want to use it as an open section over the penis shaft and connect it to a lead wire, it works great. To connect it to the liner, simply use our ComboClips to attach to a lead wire.

One Foot is $34.95

6 Inches is $17.95

Shown on 6" dildo with about 1" folded back on the shaft

Be sure to use the Drop-Down Box below to indicate 6" or 1 foot.

Tubing diameter is 1-7/16" in diameter. It will stretch about another 1/2", but be careful, as it will tear if stretched too much.

Due to the surface area of any of our larger diameter tubing, it is recommended that when using as a single pole electrode, that any other electrodes have a similar surface area. Customers have noticed marked improvement when using a small sheet of our conductive rubber sheeting, either taped to the abdomen or inside the leg area while using. This causes a balance in current flow between both electrodes. If you use a smaller electrode or TENS pad while using a foot of this tubing, you will most likely feel an enhanced current in the smaller electrode and almost none in the tubing. We have had reports from some customers who have actually sat on and connected heavy duty aluminum foil as the second electrode to balance the surface current area and it works!!

webassets/Thin-WallTubing.jpg

Item #Tube1.44Diam

What Length Do You Want?

Regular price: ~~$34.95~~ Special price $24.95

Concerned with placing your order online? Call or Fax in your order. Simply call 618-343-4344. If you wish to fax your order to us, please send all pertinent details including your credit card information and a copy of your order. Thank you.