|
|
|
ElectraStim "Controller" Remote Controlled Stimulation System
General
The ElectraStim Controller is a high specification
electronic system designed specifically for the stimulation of sexual organs and erotic regions of the body. The ElectraStim
sensation does not move or vibrate like conventional sex toys, it tingles and pulses!
The ElectraStim Controller
is intended to be used by two people. One person operates the controls, the "Dominator" (Dom) whilst the other person
receives erotic electro stimulation, the "Submissive" (Sub). Due to remote controlled operation this can be done
across a room or in a different room altogether! This enables a host of exciting possibilities including discreet use in public
places with the "Sub" blissfully unaware of what will happen next! The ElectraStim Controller is easy to use and
maintain and has intuitive tactile control buttons.
The system can operate at distances in excess of 50 metres
and is very easy and intuitive to use. The transmitter is a really neat unit and shows exactly what is happening at the receiver/stimulator
including the stimulation intensity level and one of seven selectable stimulation patterns. The receiver emits an audible
confirmation beep/s every time it receives a command but this can be disabled if silent operation is required. The "Controller"
kit comes in a durable custom fitted carry case with everything required including a leather belt/harness pouch for the stimulation
unit...
Key Benefits- Control
your partner or submissive remotely - anywhere!
- Long range operation - up to 60 metres (200 feet)
- User friendly
transmitter and receiver units
- Multiple operating modes
- Highly controllable stimulation intensity
Key Features- Microprocessor
controlled transmitter and receiver units
- Seven exciting stimulation patterns including auto escalate
- Eighteen
stimulation intensity levels
- Intensity Boost feature
- Trigger/Zap mode
- Multi-directional, high sensitivity,
movement sensing mode
- Audible receiver acknowledge beeper (can be disabled)
- Low Battery Warning
- Durable,
wipe clean, tactile control panels
- Easy to use, no dials or switches
- Ability to combine multiple transmitters
and receivers
|
What
comes with the ElectraStim "Controller" system?- The Transmitter Unit
- The Receiver Unit
- Stimulation
Output Cable
- Leather Belt/Harness Pouch
- 4 Self Adhesive Electrode Pads
- 2 x LR1 Batteries for the Transmitter
- 1
x PP3 Battery for the Receiver
- 28 Page Full Colour Instruction Booklet
- FREE
3 Year Extended Warranty Registration Card
- Custom Fitted Carry Case
|
Stimulation Patterns/Programs- Continuous
- smooth stimulation to get the feel of things
- Wave - slow and gentle wave/massage effect
- Escalating Wave
- starting with a slow wave and steadily speeding up to a fast wave before slowing down again
- Slow Pulse - a low frequency
bursting pattern
- Dual Pulse - medium burst rate followed by a fast rate...
- Falling Rest - pulsing pattern
with an ever decreasing rest period until the stimulation is constant then repeating
- Escalating Pulse - starting with
a slow pulse and steadily speeding up to a fast pulse before slowing down again
|
The
stimulation mode or pattern can be changed by pressing the Mode button. Each press will cycle through the seven Modes. The
Receiver unit will emit 2 low pitch beeps when it receives a mode change signal and the yellow light will glow in sympathy
with the selected stimulation pattern on both the Transmitter and Receiver units.
Stimulation Intensity Control
The ElectraStim "Controller has 18 stimulation intensity levels which are clearly visible on the LED display
panel. It is especially important to know the exact stimulation level when controlling another person so as to avoid un-desirable
intensity levels. Each of the six LEDs has 3 brightness levels i.e when all LEDs are off there is no stimulation. When the
Intensity+ button is pressed on the transmitter the bottom LED will glow dimly, representing level 1. When pressed again the
LED will glow brighter representing level 2 and when pressed a third time the bottom LED will glow brightly representing level
3. The same sequence is repeated for the next 5 LEDs taking the intensity up to level 18. The Intensity- button reduces the
intensity one level at a time. The Receiver/Stimulator will emit one high pitch beep when the intensity is increased, and
one low pitch beep when it is reduced.
Intensity Boost Feature
For a fast and hard intensity increase
you don’t have to turn the intensity up in the normal way, you can simply hit the ‘Boost’ button. Be warned
- this increases the intensity level by 3 levels and hence if the intensity is only on level 3 will doulbe the output level!
When the button is released the intensity level will return to the original setting. The Receiver/Stimulator will emit two
high pitch beeps when a Boost command is received.
Trigger Feature
The Trigger mode enables the "Dom"
to switch the stimulation on or off at the touch of a button. To enter Trigger mode the Mode button must be pressed and held
down for 2 seconds. A normal Mode change will first happen and then the yellow Mode light will switch off and the intensity
will default to level 3 to ensure that moderate stimulation is applied. The Mode light on the Receiver will also switch off
and 3 low pitch beeps will be emitted. The intensity can be increased as normal and decreased only to level 3. The "Sub"
will know when the intensity has been increased by the received beeps, but will not feel anything until the Boost button is
pressed on the Transmitter - the anticipation will drive them crazy! The yellow Mode light on both the transmitter and Receiver
will illuminate when the output is "Triggered" and the Receiver will emit 2 high pitch beeps. For long trigger periods
the Boost button can be continuously held down. To exit Trigger mode simply press the Mode button and the previously selected
stimulation pattern will be resumed. The stimulation intensity will then default to level 3 and can be adjusted up or down
as normal.
Movement
Sensing Mode
The ElectraStim Controller has a state of the art omni-directional movement
sensor. This means that no matter what position the "Sub" is in, if they move just a few millimetres they will get
zapped! If the "Sub" is being spanked they will also get zapped every time the paddle or hand strikes them. The
sensor works in every orientation, so it is just as sensitive when standing, laying down or sitting and will respond to slow
movement to quick and sudden movements. If your "Sub" does manage to stay very still you can always press the Boost
button to remind them who's in charge! The Receiver must be attached to the "Sub" using the leather belt pouch (supplied)
or any other means in order to detect movement.
Transmission Distance and Antenna Options
The
transmission distance is dependant upon the number and type of obstructions in the path between the transmitter and Receiver
unit and also the battery levels in the transmitter. The nominal open area distance is approximately 50 metres but this can
be improved by moving the internal antenna cable in the Receiver such that it is external to the unit. To do this you will
need to remove the battery and the foam to expose the black antenna cable. Pass the antenna cable through the small hole in
the bottom left corner of the battery compartment such that it is exposed on the outside of the Receiver Unit. Replace the
foam, battery and cover. If using the leather pouch to attach the Receiver, the antenna cable should be passed through the
hole in the pouch to ensure it hangs freely. The open area distance will now increase to around 60 metres and give better
range in all general situations.
Safety Features
Utilising digital technology allows us to
include some very useful safety features. For instance when you switch the ElectraStim "Controller" on, all power
levels will automatically be set to zero regardless of where they were when it was switched off. To shut down the stimulation
you can either reduce the intensity one step at a time or simply switch the unit off. When the Transmitter is switched off,
it also sends a signal which switches off the Receiver/Stimulation unit. This keeps them synchronised and ensures that full
control is maintained.
Low Battery Warning
When the battery becomes discharged and requires replacing
a light on the transmitter or receiver will flash. If the battery becomes heavily discharged the unit will automatically shut
down if in use or will not switch on. Use a good quality Alkaline battery for optimal life and performance. Re-chargeable
batteries are a great idea for the receiver/stimulator, one in use, one on charge and incredibly cheap long term.
High Quality User Interface
Our high quality control interface overlays have embossed tactile control buttons which
can be located simply by feel, frosted display windows, is constructed from durable reverse printed polycarbonate and securely
held down with 3M adhesive - a hard act to follow!!
Transformer Coupled Output
The stimulation
output on the "Controller" is provided by the use of a transformer. This not only provides the best stimulation
experience but also provides a safety isolation barrier.
Item #Controller
|
|
