|
|
|
Electro Rubber for Venus 2000
A great way to use your Venus 2000 for estim or for that matter, any section of tubing or simply just pull it on
over your shaft and connect a lead wire. It's all good!
Our soft stretchy conductive liner fits about
any of the Abco receivers. This material is sold by the foot. If ordering lengths longer than 1 foot it is
shipped in one uncut section.
The 2.5" wide (across when laying flat) is an excellent conductive liner for your V2000 receiver and vacuum
penis pumps. It can also be use simply stretched out and placed in an open cylinder to estim with. Circumference
of this tube is 5 inches.
We found that our 2" wide conductive tubing was generally too small to fit many
cylinders and receivers. We also had many reports of customers tearing it when they tried to stretch it too
far, so we have discontinued it and have replaced it with this larger and slightly thicker size. We think that
you will find it better suits your overall needs.
To visually see the size of the opening that a 2.5"
flat tube makes, simply measure and mark 5 inches from the edge of a piece of paper and make a circle out
of it. The circumference of the tubing is 5" and an inch larger than the 2"- 4 inch circumference
was.
For a larger clearer view
of this set-up, click on the picture to the right.
A fully equipped receiver
will look like the one set-up below. This is a single pole set up and requires another electrode placed elsewhere to
complete the circuit.
Another version of the Venus 2000 receiver to make a bi-polar
circuit can be configured as shown below using our Flat Conductive Rubber connected to the standard Venus 2000 receiver as
shown below.
Turn your receiver into a Bi-Poloar Electrode
Just
order some electrically conductive flat material, a couple of flat clips and a power box if you don't already have one.
It will usually take about a yard of our Flat Conductive
Rubber and two Flat Clips to achieve this set-up. You can purchase these products by clicking on the picture below.
  Click
on Picture for Conductive Flat Rubber
For more
information on the V2000 or a Sybian Machine, click the icon below:
Item #V2000Liner
|
|
