Out of Stock - DIY 4 Piece Cock & Ball Conductive Silicone Set
Want to build your own cock and ball rings to get that personal
fit? Now you can. This four ring conductive silicone set gives you the option to build your own comfortable and
personal fit. Simply pull them apart from the brass snap connectors, wrap each one around the part of the shaft, head, base
or balls and cut them off for a perfect fit. Caution: Be careful not to cut too much off of them. As the big guy expands,
the tubing may pull apart from the pressure!! Be sure to allow enough room before cutting to be sure they will fit flaccid
or fully erect. After cutting, just push them back together and your all set. The male snap connector can be used
with PES leads or any of our TENS to Snap adapters or Banana to Snap adapter wires. These can be found in our Wiring
and Adapter Catalog Section.  The rings also come with two sets of snap leads that have a 2.5mm
audio connection to a power box. If you do not have such a power box connection and have a 3.5mm audio jack or
leads, all you need is a 3.5mm male to a 2.5mm female adapter.
If you have your own snap adapters you can discard the leads enclosed with the product. Leads with snaps are not included and are for illustration purposes.
Item #4RingDIYRings
|
