Professional Quality DIY Banana Pins Single or in Sets of 2
For those of you who enjoy build making your own wiring and connections, these heavy-duty
banana pins will definitely add a professional look to your cabling collection.
Price shown is for a single pin assembly. We offer these in single pin assemblies
or sets of two. A set of two is cheaper at $4.95. Please make your selection for either Black or Red if you are making
a single purchase or Red and Black or all Red or all Black when ordering these in sets. The Drop-Down box below has
all the necessary selections you may want.
simple three-piece design allows you to take them apart, insert a short portion of stranded wire into the collar and then
fray and spread the end out in a circular pattern and screw the collar cap onto the wire. This produces a good secure
connection to the cable. You then screw the top portion containing the banana pin to the assembly and you are ready
The grooved ridges on the outside
of the assembly makes it easy to turn them easily and securely.
Caution!! The inside assembly is not insulated and current will
pass through to the outside assembly. To avoid any electrical shock, it is advisable to either plug the pin into the
electrode first before turning on the power or place electrical tape or electrical shrink tape over the part you intend
Shown below are the three steps of assembly for your wire.
STEP #1. Place the wire through the back collar. Alarger diameter wire will always make a better and more
STEP #2. Fray the strands of wire. Fan them out, but not long enough to hit the threads when inserted
into the middle collar.
STEP #3. Screw the wire into the middle assembly, making sure it is secure and does not pull out. Screw
the Banana or if you have the TENS pin version onto the middle assembly. This further secures the wire you placed into
Double check to be sure all is secure. If so,
you are ready to use. If not, take the assembly apart and re-assemble making sure the stranded wire is nice and tight
over the bottom collar assemble, refit, screw it in and check for a secure fit.