If you want to be sure you get a nice snug custom fit in a single-pole tri-ring design, this kit is a great one to buy.  It even"cums" with an additional cock ring that you can place around the shaft or head to connect to a separate wire to complete the circuit.  :)

Once you get the correct diameters for the base and balls, the ball sack and the base of the shaft figured out, simply cut the conductive tubing to length, press the brass fittings into place and you are good to go.  Each conductive tube has a snap connection point, so you can be sure to get current to each one without any loss of conductivity. the illustration shows the length of each tube, so there is plenty to make the right fit for you.

Also included is a 2.5mm audio lead with 4 female snap connectors.  You may need an adapter to use this lead if you have a 3.5mm or TENS (round dot) connections into the power box. If you are not sure what adapter you might need, drop us an email and tell us what power box you are using and we will guide to to the right adapters or lead.  Once all fitted and connected, you are sure to enjoy some great stimming!!